Yamaha YST-SW105 Subwoofer

Då vi bytt ut vår hifi utrustning här hemma så säljer vi nu en del av våra "gamla" högtalare. Denna annons gäller en Yamaha Subwoofer, enligt rubrik. Frontfiring! Dvs, mycket lättplacerad! Ingen subwoofercrawl nödvändig med andra ord... Vi har också matchande Yamaha centerhögtalare och golvare ute på annons. Subwoofern är i bra skick och givetvis fullt fungerande. Noppror och en och annan reva förekommer på grillen. Hämtas i Västra Frölunda, Göteborg "If you're looking for a great-sounding, compact, and affordable way to add impact to your A/V system, you've found it! Yamaha's slimline YST-SW105 powered subwoofer is perfect for folks who want to add serious bass to their listening, but don't have the budget (or the space) for a larger sub. The sub's small footprint lets you place it where many other subwoofers wouldn't fit. And you'll be amazed when you hear the clean, high-energy bass this little slugger sends your way!" (Crutchfield) Specs: Enclosure: Bass Reflex Woofer Size: (inches) 8 Woofer Composition: Paper Firing Direction: Front Frequency Response: 30 Hz to 200 Hz Power Output: 100 watts into 5 ohms Crossover Slope: 24dB per octave Power Consumption: 80 watts (0.8W in standby mode) Weight: ~20 lbs Amplifier Output: (watts) 100 Frequency Response: 30-200 Hz Preamp-Level Inputs: Yes Speaker-Level Inputs: Yes Speaker-Level Outputs: Yes Low-Pass Crossover Freq: 50-150Hz Standby/On power switch: turns the unit on or off (standby) BASS Switch: Bass Action Selector System, set to movie or music mode, depending on the source material Power LED: illuminates green when on, illuminates red in auto standby mode when no signal is input, and no light if it is manually turned off High cut knob: variable rotary knob used to adjust high frequency cut off point; 50-150Hz Volume knob: variable rotary knob to adjust subwoofer's output level Left and right speaker level inputs: posts which will accept bare wire or banana plugs (spade plugs not accepted) L and R speaker level outputs: posts which will accept bare wire or banana pluhs (spade plugs not accepted). These outputs are full frequency range, the crossover setting has no effect on the speaker level outputs. Preamp level inputs: left and right RCA inputs; note that if your receiver has only one mono subwoofer output, you can use the left input on this unit, a "Y" adapter is not required Auto standby switch: a three position switch. The switch may be set to "OFF" (unit will not automatically turn on/off), "LOW" (low sensitivity; requires a greater amount of signal input to turn on; this is the typical setting) or "HIGH" (high sensitivity; will turn on with a lower level of signal input). The high sensitivity position is useful for classical music, etc., where signal levels may be extremely low, but it also makes it more likely that the unit will not turn off when a signal is no longer being input. Power on/off (main) Colour: "Cherry"